>Would ask you for an advice: do you think, for SSB, important to install
the ROOF-FILTER 1.8Khz ?
Mandatory on 40m ! Not so important if you're not on a crowded band with
stations putting out some serious KW of RF just above and under your
operating frequency - then the factory installed 2.4KHz filter should be
good enough for SSB. Choose the 2.4KHz roofing filter and reduce the BW to
2.0KHz should help also in some case...
My $0.01
;-)
Eric.
-----Message d'origine-----
Thanks dear Carl,
i am doing all the tests with my ORION, but the reception of the SUB-RX is a
true disaster,_ Long wawes and Medium wawes i can say don't exist, in
receiveing a signal with S = 8/9 you can see black only the space between
first and second line, and (same settings) you switch from Main to Sub,
sometime you listen very very low in comparison of Main, sometime you listen
nothing.
Would ask you for an advice: do you think , for SSB , important to install
the ROOF-FILTER 1.8- ?
thanks again
IZ6FWF
Ascani Adriano
Italy
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|