Mark:
Thanks. It should be the same...pins 2,3,5,7 and 8. Inside the Jupiter pins
1,6 and 4 are jumpered together according to the schematic.
John
-----Original Message-----
From: Mark Erbaugh [mailto:mark@microenh.com]
Sent: Saturday, January 18, 2003 12:22 PM
To: John L Merrill; Tentec
Subject: Re: [TenTec] Jupiter serial interface
John,
If it's like the Pegasus interface you only need TXD, RXD, RTS,CTS and
Ground. On my Pegasus, I use the DTR line to activate a remote auto tuner.
Mark
----- Original Message -----
From: "John L Merrill" <jmerrill1@adelphia.net>
To: "Tentec" <tentec@contesting.com>
Sent: Saturday, January 18, 2003 12:03 PM
Subject: [TenTec] Jupiter serial interface
> Anyone know if you need all 9 wires in the DB9M to DB9F cable? From the
> schematic, it looks like I cud get away with 5.
>
> John N1JM
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <tentec@contesting.com>
Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/2003
|