TenTec
[Top] [All Lists]

[TenTec] CFO? + cheap multiband vertical

To: <tentec@contesting.com>
Subject: [TenTec] CFO? + cheap multiband vertical
From: k5uj@hotmail.com (Rob Atkinson, K5UJ)
Date: Wed, 04 Sep 2002 17:31:47 +0000
>Any good CFO squawks on 40m?

Chief Financial Officer?

For a cheap multiband vertical with no radials, try this:

Make a wire dipole, each side at least 20' long (or 5 or 10 feet longer if 
you can) and hang it from a tree, or any nonmetalic support available.  You 
can make a support by using sandwiched overlapping 2x4s with a little 
guying.  Put a short plank at  the top to hang the dipole off of.  At the 
feedpoint attach open wire feed or ladder line and run that away at 90 
degrees from the dipole to a balanced transmatch in the shack.  Tie down the 
bottom so it doesn't flap around.  As a vertical this will work well I think 
and be useable over a wide range of frequencies (determined by the inductors 
and capacitor you use in the balanced feedline tuner).

Okay, there's no free lunch and while the antenna is cheap, if you don't 
already have the tuner, that will cost some money for the components, 
especially if you are building or buying one for 1.5 kw.
OTOH, you'll have an addition to your shack that you will be able to use on 
all kinds of antennas fed with open wire line.  The key here is using a 
_balanced_ transmatch, sort of two synchonized LCs, one on each leg of the 
feedline sharing a capacitor with a balun between them and the transmitter.  
Keep the antenna simple; let the matching network do the work.  See: 
http://www.vcnet.com/measures/bbat.html


Rob Atkinson
K5UJ
k5uj@hotmail.com

_________________________________________________________________
Join the world?s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] CFO? + cheap multiband vertical, Rob Atkinson, K5UJ <=