Hello all , I thank all who have been helping me out here on line . I think I
need to highlight the fact that I double checked and then had another person
check the wiring between the Orion II and the titan III amp and it is correct I
also followed the coax from the radio to the amp to the tuner to the antenna
switch all is correct . I then checked rca plugs and coax for continuity and
again all is good . the tx menu is set for keying loop one on and the amp key
track loop is on . when the radio and the amp are connected and ready to go I
key up the radio with the amp switch on standby and see power going to the watt
meter in the tuner then I move the switch to the operate position and tune and
the same meter shows no power out put as well as the meter on the amp . that
is where I am at right now . John
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|