Hi John..thanks again for listening to our input etc...TenTec is doing a
great job in this area...on the other hand I have been very busy these past
few weeks but will be back in the swing of things soon. My station operated
in the Georgia QSO Party this past weekend and with 9 Orions made 2080
contacts in 8 hours...these were 80m ssb and cw, 40m ssb and cw, 20m ssb
and cw, 15m ssb and cw, and 10m ssb all simultaneously at the same
time...rigs were operated using amps at legal limits on the SAME bands on
different modes at the same time..the Orions are BULLET PROOF and
Unbelievable in their capabilities...but then I am preaching to the choir!
de Rick NQ4I
On Mon, Apr 16, 2012 at 4:53 PM, John Henry <jhenry@tentec.com> wrote:
> Just posted a firmware update for the Orion Model 565 at the TenTec
> website.
>
> http://www.tentec.com/pages/Transceiver-Downloads.html
>
> Scroll down to the 565 section, and Ver3.032 is in the right column.
> Download it as usual to "install the installer".
>
> Changes include:
> Fixed HW_MIC_GAIN setting so it is set to 5dB gain at reset.
> Improved AN function response time.
>
> This build is a result of customer's input.
> The HW Mic Gain change resolves some 565s having low output power on
> 10m and 20m.
>
> If anyone has issues with this build, please let me know so that we
> can correct it or improve it.
>
> Thanks,
> John Henry, KI4JPL
> TenTec Engineering
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|