I pulled the oem fuse holder and jumpered in back of same...
After installing Powerpoles in both my orion and Omni 7, I ran an inline
fuse holder on the pigtail going to the power supply.
--------------------------------------------------
From: "Rick W" <ve7tk@yahoo.ca>
Sent: Tuesday, June 26, 2012 11:31 AM
To: "Ten-Tec Reflector" <tentec@contesting.com>
Cc: <hglent@frii.com>
Subject: [TenTec] RD: Anderson PowerPole conversion on Orion I
> Working on the assumption that your Orion 1 is actually an Orion, the mod
> your after is on the Ten-Tec wiki:
>
> http://www.tentecwiki.org/doku.php?id=orion_molex_to_power_pole_mod
>
>
> 73,
> Rick
> VE7TK
>
>
> Website: http://www.ve7tk.com
>
> Subject:[TenTec] Anderson PowerPole conversion on Orion I
> From:"Paul K." <hglent@frii.com>
> Reply-to:Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Date:Tue, 26 Jun 2012 13:49:30 -0400
> List-post:<tentec@contesting.com">mailto:tentec@contesting.com>
> Smoke from the Orion got my attention! While operating the Orion, I heard
> a few click of a relay and the radio
> shut off. I tried to power up with no results. I pulled the power
> connection and the fuse. The power connector is in good condition, but
> one of the spades on the fuse was burned and melted. The fuse was not
> blown. Obviously, for some reason there was a build up of heat on the
> spade
> connection of the fuse which resulted in the failure of the fuse
> connector. I remember seeing something on this reflector about converting
> the Orion
> over to the Anderson PowerPole connectors. Please, some one direct me
> to the conversion information. Along the same line, has anyone come up
> with a conversion of the fuse
> connector to the standard size fuses used in the Anderson and MFJ power
> distribution boxes? Thanks on helping me get the smoke put back in the
> Orion. Paul K.
> WA0BAG
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|