I USE A PRODUCT CALLED ( DEOXIT) BY CAIG LABS YOU CAN GET IT AT MUSIC SHOPS
OR ONLINE RADIO SHACK DOES HAVE IT ALSO ABOUT $15-18 a can but it is the best
belive me when I tell you !
-----Original Message-----
From: Bob McGraw - K4TAX <RMcGraw@Blomand.net>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Sent: Thu, Aug 14, 2014 2:12 pm
Subject: Re: [TenTec] Omni VI+ problems
I would proceed and unplug each connector, one at a time. Apply a very
small amount of contact cleaner to the female part. Then using a Q-Tip
with again a very small amount of contact cleaner wetting the Q-Tip, wipe
each of the male pins. Then plug that connector back in and remove another,
following the same process, for each one.
I bet you'll be surprised and it will perform like a new radio.
73
Bob, K4TAX
.
----- Original Message -----
From: "John Farler" <k4avx1@windstream.net>
To: <tentec@contesting.com>; <service@tentec.com>
Sent: Thursday, August 14, 2014 12:12 PM
Subject: [TenTec] Omni VI+ problems
> My Omni VI+ has gone off to lala land. It suddently stopped
> receiving, and I turned it off. Turning it back on made it do
> one of two or three things:
> Just one light came on the lock light.
> or all the lights around the tuning knob light up.
> or lights on one side of the tuning knob light.
>
> The main frequency displayand associated indicators
> does not light.
>
> Unless it's just a connector problem, it's back to
> the mother ship. Any suggestions?
>
> John, K4AVX
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|