Rick and All,
Interesting options. I plan to use the Processor switch. I have a narrow
filter, and you processor is not used in CW or psk 31. On phone, I plan to
back off the processor control off which is the same as turning it off (I
think) when I don't need it.
At 01:14 PM 8/7/2005, Rick Williams wrote:
Dave and all.
The Omni V looks like it has another option. Unlike the Omni VI, the NB is
switched with a push button on the front panel. The 'intensity' of the NB
is adjusted with a 10 kohm pot.
My plan is two-fold:
1) replace the 10 kohm pot with a switched 10 kohm pot to do both
functions. This would free up the NB button on the front panel.
2) Switch the roofing filter on my Omni V.9 with the NB switch on the
front panel
I have the parts -- I just haven't found the time BUT I think it will work
quite well and I lose NO functions.
Thoughts?
73,
Rick
VE7TK
Website: http://www3.telus.net/ve7tk
------------------------------
Message: 6
Date: Sun, 07 Aug 2005 1
Subject: Re: [TenTec] INRAD ROOFING FILTER & AUDIO MOD FOR OMNI VI
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
------------
The FM and VOICE buttons (nor any other button on the main keypad)
CANNOT be used directly for this function. They have a different logic
interface with the main ?Processor and would require a buffer in order
to drive another load, such as the Inrad roofing filter mod.
73, Dave, K1FK
Fort Kent., ME
ARRL Life Member
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|