I'm toying with acquiring a TT RX-340 and have a question. Are they mains
power only or is there a 12V socket. Reason, I use the 12V as a backup.
73, John de VK2XGJ
You're all jealous because the voices
only speak to me!
-----Original Message-----
From: Scott Walker
Sent: Sunday, August 19, 2012 7:33 AM
To: tentec@contesting.com
Subject: Re: [TenTec] Audio Pad for RX-340 -> Laptop?
Bob:
Thanks. Works great with these values.
73
-Scott N3SW-
"Message: 16
Date: Fri, 17 Aug 2012 07:50:43 -0500
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Subject: Re: [TenTec] Audio Pad for RX-340 -> Laptop?
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <890DAC0676E844E29108E3600663D041@FAMILY>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Scott, usually an L pad made of two resistors will likely work. I suggest
starting with a 10K series and a 1K shunt on the line from the receiver to
the laptop. The 1K value should be on the end to or at the laptop. If that
doesn't provide adequate attenuation, increase the series resistor. I've
made several of these and have found the space inside a sleeved RCA type
connector adequate to put the two 1/8 watt axial lead R's.
73
Bob, K4TAX"
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|