As a Jupiter owner, I have to live with a common control for AF & RF
gain. It ain't that bad. Standard operation for me is to set the AF
gain slight higher than would seem normal. Then switch to RF gain and
back the noise down. Noise just disappears and the signal stands out.
Pretty much most of the time, I am listening to a signal standing out
from a noise free background.
John / WA1JG
On 2/24/2012 9:37 AM, d.e.warnick@comcast.net wrote:
> I've learned to use it the way it is, and that's OK. If i were to change
> anything on my O-II, I'd have the present AF gains as permanent RF gains, and
> make the AF gain part of the multi knob
> Dave
> WA3F
>
> ----- Original Message -----
> From: "Martin Sole"<hs0zed@csloxinfo.com>
> To: "Discussion of Ten-Tec Equipment"<tentec@contesting.com>
> Sent: Friday, February 24, 2012 9:26:28 AM
> Subject: Re: [TenTec] RF Gain control
>
> But but but...
>
> They are not pots, they are encoders that drive the software, yes even the
> RF and AF gain, hence my original suggestion to have the RF gain changeable
> to AF gain on the multi knob with RF gain then available on the AF knob.
> However a more elegant solution might be to do this in software but retain
> the names such that AF gain actually varies the DSP drive level and RF gain
> sets the perceived noise level.
>
>
> But still you are right the multi knob, though a great idea does seem to be
> a bit over used. As an example I rarely use the PBT/BW and Hi/Lo cut at the
> same time and would rather they were an either or selection, same goes for
> the RIT function which I almost never if ever use, much preferring true
> split op. Were I involved in any sort of design forum I would argue for a
> similar sort of display with perimeter soft keys but also perimeter soft
> encoders such that the user could arrange function based on preference with
> no fixed state. I would do this with a configurator application on a pc that
> could be uploaded to the radio to change the panel layout.
>
>
>
> Regards
> Martin, HS0ZED
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of Paul DeWitte
> Sent: 24 February 2012 21:12
> To: tentec@contesting.com
> Subject: [TenTec] RF Gain control
>
> Using the multi knob for everything but fixing breakfast has been my main
> dislike of the Orion.
>
> This may not work, or maybe not liked by many,
>
> Put a dual function pot on the AF gain knob. Make one the AF gain and one
> the RF gain.
>
> Either one like the Eagle has where you push it to change from one to the
> other, or an inside outside pot.
>
> I use both regularly depending on band and/or antenna.
>
> Just my opinion
> Paul K9OT
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4829 - Release Date: 02/24/12
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4829 - Release Date: 02/24/12
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|