TenTec
[Top] [All Lists]

Re: [TenTec] Help with deaf Argonaut 509...

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Help with deaf Argonaut 509...
From: Roscoe Primrose <roscoe@aiko.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 29 Jan 2009 00:28:18 -0500
List-post: <mailto:tentec@contesting.com>
On 1/28/09 10:45 PM, Joe Hutchens wrote:
I've had the antenna selection switch on the back get dirty. Cleaning it solved 
my problem...back when I had a 509.

Thanks for the idea. Bypassed the switch, no big deal since I'm not using a separate receive antenna, no change in sensitivity...

OK, who's next ;-)

73s, AJ4LL

--
Joe Hutchens ( AJ8MH )
http://webpages.charter.net/aj8mh-radio/

---- Roscoe Primrose<roscoe@aiko.com>  wrote:
My Argonaut 509 seems to have a serious receiver sensitivity problem.
The other night when 80M was fairly noisy, I was getting noise at S6-S8
on an FT817, hooked the same antenna to the 509, an even with the RF
gain all the way up, the S-meter baorly moved, if at all. RF noise is
generally not enough to move the S-meter, and I've made several easily
understandable QSOs with no motion of the S-meter. The S-meter is
working, with very strong signals it does occasionally get up to S-9. I
originally thought the problem was the first stage dual-gate MOSFET, but
I'm pretty sure that's not the problem at this point. When
troubleshooting the first stage MOSFET, when I hooked a DMM lead to gate
1 I get a stronger signal (not just noise, but signal as well) from the
test lead than I do from the antenna connected to the unit. On the RF
front-end board, the antenna signal goes through an input cap, a
transformer/cap combination that's a 9MHz trap (VFO), through a tuned
transformer which is part of the pre-selector, through a coupling cap,
and to gate1 on the MOSFET. Connecting the DMM lead directly to gate1
causes an increase in signal&  noise, connecting it anywhere before the
coupling cap results in no change in signal level. I changed the
coupling cap, but there was no change in performance.

Anyone familiar enough with the front-end on these rigs to have an idea
as to what I can check next?

Thanks, AJ4LL

--
"The tree of liberty must be refreshed from time to time with the blood of patriots 
and tyrants. It is it's natural manure."
Thomas Jefferson, 1787.

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


--
"The tree of liberty must be refreshed from time to time with the blood of patriots 
and tyrants. It is it's natural manure."
Thomas Jefferson, 1787.


<Prev in Thread] Current Thread [Next in Thread>