Same here, and same result. I am the one who started the thread.
However, I should point out that when it started, we were talking about
the O2.
I am now quite convinced that for everyday CW DXing, the AGC serves no
purpose. I consistently have better readability by turning it off, then
preamp on, RF gain low/audio high, and at least a little attenuation on
40-160m. I only use digital NR when I am desperate, but the HW noise
blanker is great.
That, together with pretty good conditions, got me 5 new ones this weekend.
Al Gelders wrote:
> Having followed this thread from end to end I spent the weekend trying
> various combinations of AF/RF gain on my Omni VII. I ended up turning
> up the AF gain, turning on the preamp and using the RF gain to control
> output. On 20M I ended up having to turn on noise reduction to 9. At
> that point I thought I might be getting a bit of improvement but I
> haven't spent enough time to be sure.
>
> So, has anybody spent enough time with the Omni VII to suggest the best
> combination of all of these parameters?
> Thanks, Al KI6NRE.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
--
Larry N8KU
l o n g w i r e . c o m
HF - DX - CW - Digital
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|