TenTec
[Top] [All Lists]

Re: [TenTec] Yaesu FL-7000 to Orion

To: tentec@contesting.com
Subject: Re: [TenTec] Yaesu FL-7000 to Orion
From: Bob Henderson <bob@cytanet.com.cy>
Reply-to: tentec@contesting.com
Date: Tue, 18 May 2004 18:38:39 +0000
List-post: <mailto:tentec@contesting.com>
Don

Not quite.......to interface the Orion to the FL7000 for auto band change you will require some logic to make the interfaces compatible. This will take the form of a 16 to 4 line encoder of some type. Definately not just a cable. If you are not familiar with binary logic yourself you'll need to enlist the help of someone local to you who is.

I hope I've clarified that for you.

73 Bob, 5B4AGN

Don wrote:

Bob


"It is possible to auto band change the FL7000 or other Yaesu amp from the Orion but not without an encoder to produce compatible band data.


Yaesu provide binary parallel band data from their radios and that is what the FL7000 uses for auto band switching."

So if I understand this correctly to "auto" band switch all I should have to do is make up the cable? Just want to confirm that I am reading correctly.

thanks

Don kd6hq

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec






_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>