I have not noticed this until today, because I run a lot of PSK31
where not much power is ever needed.
However.. with RF power maxed out and the "Tune" button depressed, I
get the following readings of indicated power out.
10M - 73 watts
12M - 95 watts
15M - 96 watts
17M - 98 watts
20M - 98 watts
30M - 99 watts
40M - 100 watts
80M -100 watts
160M - 99 watts
All readings taken while hooked up to a dummy load.
So .. what's going on with 10M? I would be curious to hear what some
other Jupiter owners are getting for power out on 10M. Not much
difference on the other guy's S meter going from 75 to 100 watts, but
then again, it does not seem to be meeting specs on 10M.
Bill, W6WLB
|