TenTec
[Top] [All Lists]

Re: [TenTec] Dipole Over Pool Enclosure

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Dipole Over Pool Enclosure
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 11 Oct 2012 21:13:13 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I wouldn't be too concerned about the dipole over the pool enclosure. It would be quasi like a dipole over the earth at a height of 5 ft.
I would be concerned about the Titan amp, specifically running that much 
power, as some of the aluminum structure might appear with some interesting 
resonant nodes.  Also, the typical poor and oxidized mechanical connections 
of the pool enclosures I've seen might act like a diode junction and 
generate RF due to the rectification between dissimilar metals.  Generally 
this is not RF you'd be proud to claim as the owner.
Also, I'd say that any occupants under the antenna, in and around the pool 
are likely to be exposed to RF fields in excess of those prescribed by the 
FCC.
You're a ham, try it.  If it smokes, then you know it was a bad idea.  If it 
works, then enjoy the DX.    If the neighbors complain about RFI then look 
for more real estate.  Basically I say "more power = more problems".
73
Bob, K4TAX




----- Original Message ----- From: <knoxcol@aol.com>
To: <tentec@contesting.com>
Sent: Thursday, October 11, 2012 2:49 PM
Subject: [TenTec] Dipole Over Pool Enclosure


Do any members of the group have experience with erecting a random length 
dipole about 5 feet over a swimming pool enclosure made of a grounded 
aluminum structure and fiberglass netting?   (Enclosure is about 15 feet 
high at its peak and the antenna will be about 5 feet over this.)
I am wondering how the grounded aluminum frame will affect the radiation 
(and loading) characteristics of the antenna.
I will be feeding the antenna with a Ten Tec Omni 6+, a Titan Linear and a 
TT 238 tuner via RG-213 cable.
Any insights, guidance and suggestions would be greatly appreciated!

Please reply off line to me at KnoxCOL@aol.com

Thank you and 73!

de Dick KD4BRL


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>