Hi Gary ,
Messed up on the resistance readings across the solenoid coils: both coils
are in paralel on any given band so when you read across them ,the DC
resistance should be 205 ohms.Any other reading across the coils is bad(i.e.
410 ohms says one of the coils is open) Hope this helps.
73 de Bill
----- Original Message -----
From: "Gary Jacek" <Gary.Jacek@telus.net>
To: <tentec@contesting.com>
Sent: Monday, September 29, 2003 11:03 AM
Subject: [TenTec] Jupiter - No Transmit Power on 15 and 17 Meters
> I have discovered that my Jupiter no longer transmits on 15 and
> 17 meters.
> All other bands are working fine.
>
> On 15 and 17 the TX and ALC lamps are illuminated, but power out
> measured
> on both the Jupiter display and the AT-11MP is zero.
>
> I have tried a master reset but it makes no difference.
>
> Time to get on the phone to TenTec?
>
>
> 73 de Gary
> VE7GGJ
>
>
> --
> Do you bank? Do you use ATMs? Then you've used IMS.
> Nothing has ever compared to the reliability and speed of IMS.
>
> http://researchweb.watson.ibm.com/journal/sj/374/blackman.html
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|