Mark,
I made a simple mod to my Orion to bring the antenna signal that goes to the
sub-receiver out of the Orion to connect to the RX340 or any other
receiver. The mod is written up in my Orion help file which you can
download at my webpage at www.n4py.com. It is very similar to the
Pegasus/Jupiter mod I made for an AUX receiver jack.
73,
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Mark Erbaugh" <mark@microenh.com>
To: <tentec@contesting.com>
Sent: Wednesday, August 06, 2003 1:55 AM
Subject: [TenTec] Antenna Splitter
> After clearing up a mix up with my credit card company, my new Orion
should
> be here in the next day or two. I'd like to hook up a simple antenna
> splitter so I can feed the same signal to both the Orion and another radio
> for A/B comparisons. I know I could use an A/B switch, which I have, but
> that requires switching so the two wouldn't be hearing at exactly the same
> time. If I could use an antenna splitter, I could feed the same signal to
> both and record the audio on separate channels of a stereo recorder. That
> way, when a QSB or QRM happened you could replay the recording and see how
> each radio performed.
>
> I'm interested in comparing the Orion with the RX340 and with the Omni VI
> (opt 3).
>
> 73,
> Mark
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|