Rich
Had and have the same problems on different bands. Seems like sticking
relays but support was less than normally expected from Tentec. With no
circuit diagrams it makes diagnosis that much harder. Shelved mine for now
but would sure like to know the best approach. Sorry that I cannot be more
helpful.
Mike
GU3WHN Ex 9V1OB DA2XS
----- Original Message -----
From: "Rich McCabe" <r.mccabe@1967z28.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Friday, January 27, 2006 12:27 AM
Subject: [TenTec] Pegasus xmit problem
>I have a Pegasus that has been sitting in storage for awhile. I am just
> pulling it out and getting it back online.
>
> When I put it away I removed the factory internal tuner. I am pretty sure
> I
> checked it afterwards but its been long enough I cant remember for sure.
>
> Anyway, it transmits about 75 watts on 15 and 20 meters but has no power
> on
> any other bands. It acts like it is transmitting but has no power out. As
> a
> matter of fact, it is drawing HIGH current on the other bands when
> transmitting. I think on 15 and 20 it is draws about 12 amps (crude
> estimate
> based on astron meter) and on other bands that have no power out it is
> drawing anywhere from 15 to 30 amps.
>
> Just getting ready to tear into it. Any suggestions?
>
> Rich
> kd0zv
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|