Rick,
Do you have VOX enabled? I don't use VOX so I don't know if the audio in
line will key VOX. I prefer to use some sort of serial port to PTT interface
rather than VOX, anyways. There are many simple interfaces that will do the
trick.
Take a look at:
http://www.packetradio.com/00rascal/R-TTOMNI.gif
Note the middle circuit that goes from the DB-9. That's all you need to key
the rig. Isolation and level adjustment are nice features and you may want
to add those as well.
73,
Mark
----- Original Message -----
From: <wo8l@att.net>
To: <tentec@contesting.com>
Sent: Sunday, December 30, 2001 17:41 PM
Subject: [TenTec] PSK Interface
> Hi,
>
> Thanks for the responses.
>
> Using the audio out connector, the OMNI V receives just
> fine.
>
> However, using the audio in hole, the transmitter does
> not key.
>
> I'll check my cables and plugs first.
>
> Do I need any kind of hardware or other arrangement to
> key the transmitter. Or should it key from the speaker
> plug of the sound card into the audio in plug on the
> OMNI V.
>
> Thanks again,
>
> Rick
> WO8L
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|
