The Ten-Tec MODEL 234 SPEECH PROCESSOR has been sold...
Thank you very much to all that have inquired about the radio.. I will try
to reply to everyone... My mail box has been very full!
TNX agn... 73 ... Ken - VE5KC
P.S. I still have another Speech Processor for sale. (NOT Ten-Tec)
This one was a kit from Matric - (Model 60)
It will increase your power output up to 8db.
It worked very well for me on both a Ten-Tec Omni-C and Argo 509.
Going for $50US including shipping via mail.
-----Original Message-----
From: owner-tentec@contesting.com [mailto:owner-tentec@contesting.com]
On Behalf Of Ken
Sent: Thursday, September 17, 1998 2:28 AM
To: [TENTEC] - Reflector
Subject: [TenTec] FS: Speech Proc - LOWER PRICE!
For Sale:
Ten-Tec 234 Speech Processor in excellent condition w/manual.
A great addition to your Ten-Tec station to increase talk power and increase
average power output (SSB)of your rig. Works with earlier rigs, Omni-A,
Omni-C and Argonaut rigs.. etc.. Some even use them with newer Omni's..
Price: $80US - Shipped to Canada or US (lower 48 states)!
-----------------------------
MODEL 234 SPEECH PROCESSOR
(from Manual)
The Model 234 is a high performance rf-type speech processor designed to
operate with most transceiver systems. It will provide an average 5 to 6 db
increase in average power output in ssb service, This power increase,
coupled with
its unique ability to tailor the speech passband, can make the difference
between
a solid contact and none when conditions are marginal, Because it is an rf
processor, the harmonic distortion that must occur in the clipping process
is
completely removed by the second crystal filter, Unlike conventional
clipper/
compressor systems, Model 234 provides the capability to tailor the
frequency
response of the system for optimum processor punch.
SPECIFICATIONS
Power Requirements: 11-16 VDC @ 75mA
Microphone Channel Input Impedance: 5O0 k
Operating Input Level: 25 mV
Maximum Input Level: 400 mV
Maximum Output Level:
A.) No Processing: 400 mV
B.) Full Processing: 75 mV
Minimum input for Full Processing: 5 mV
Controls: PROCESS CAIN; PASS BAND ADJ; IN-OUT SWITCH
Semiconductors: 2 ICs: 10 Transistors; 5 Diodes
Filters: 2 Four Pole Monolithic
Size HWD: 2-1/2" x 4-3/8" x 7-5/8"
Weight: 1 lb,, 5 02.
---------------
Comments on 234 from the reflector:
> I use my RF (234) processor in place of the audio speech processor in my
Omni VI+ > > level 3, and am very happy with it. Steve - KJ7CH
--------------
Ken - VE5KC
E-Mail? - ve5kc@qsl.net?????
????????- fsr567@sk.sympatico.ca
? ?????
Web sites:
KC's Amateur Radio Page - http://www.qsl.net/ve5kc/
KC's Canada Page - http://www3.sk.sympatico.ca/fsr567/Canada.html
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|