Hello Again Guys and YL's
This time I have a hardware question
I went out and found all the parts for the interface for controlling the
rig from the computer ( not cw keying) I have an old email that has the
parts placement for the interface. Problem is that some of the lines got
messed up in the transfer I can figure out most of it but I can't tell the
position of the zener diode. I know it goes between pin 2 ( pin 3 on the
DB25) and pin 5 (pin 7 on the DB25) on the DB9 but which polarity of the
diode that part got lost in the transfer all it shows is a straight line and
it is labelled 5 volt zener diode.
As soon as I can get that answer I can make up this cable and I can have
computer control of my Kenwood 940 in the contest this weekend
And yes I have the IF-10b and I bought a extra serial card today.
Whew I have a lot to do this week. pant pant :)
73
Rick
KC5AJX
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|