> My KB2HUN.CFG file has the following info (forgive typos):
> RADIO ONE CONTROL = SERIAL 1
> RADIO ONE BAUD = 4800
> RADIO ONE NAME = IC765
> RADIO ONE TYPE = IC765
> RADIO ONE RECEIVER = 44
That should probably be RADIO ONE RECEIVER ADDRESS = 44.
> That is the whole file. I know you can add more. I think that any of the
> control-J commands can be added for faster setup (right tree?).
True - every control-J command has a corresponding LOGCFG.DAT command.
If you change it in Control-J, you can use the Alt-G or Alt-W commands
to add them to your LOGCFG.DAT file so the change is there when you
restart the program. Alt-G write the specific parameter you have
selected with the cursor, and Alt-W will write all of the parameters
you have changed during your Control-J session.
> a single MAX-232 chip and a couple of parts. If there are any other
> questions, please let me know. I hope this helps others. Many people
> helped and I THANK YOU!!!
This is the type of thing I had hoped the reflector would bring about.
73 Tree
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
|