Dear Josep:
Ed said:
> TR-Log needs the ICOM address in decimal, so just convert
> between hex and decimal to get both the radio and TR-Log
> on the same address.
Yeah, well....for those of us to whom this is a foreign language, I have
included a snippet from my configuration files that helps me keep it
straight. If I didn't do it this way, with the helpful comment lines, I
think I'd become an axe murderer. Here's what my CFG files say, and these
combinations work perfectly:
RADIO ONE TYPE = IC746PRO
RADIO ONE CONTROL PORT = SERIAL 2
RADIO ONE BAUD RATE = 4800
RADIO ONE RECEIVER ADDRESS = 86
;for base 10 "86" radio says hex "56h"
RADIO ONE ID CHARACTER = L
RADIO ONE NAME = <<<<<<<
RADIO TWO TYPE = IC746PRO
RADIO TWO CONTROL PORT = SERIAL 1
RADIO TWO BAUD RATE = 4800
RADIO TWO RECEIVER ADDRESS = 102
;for base 10 "102" radio says hex "66h"
RADIO TWO ID CHARACTER = R
RADIO TWO NAME = >>>>>>>
BTW you can convert from one to the other using the calculator in Windows.
Click on "view" and make sure "scientific" is selected, not "standard."
When you do, then click the bullet that says "Hex", put in the Icom address
you want (on the 756PROII you have a bunch of addresses to choose from in
the menu, right?), but don't put in the "h" - i.e. if you set the radio to
"66h" just put "66" onto the Windows calculator. Then click the "Dec"
bullet and the amount in the display is miraculously transformed to the
number that you should type into TRlog.
One last thing, since I get the impression Tree has recently experienced a
new surge of TRlog energy (I was handed a new alpha version of TRlog in HC8
at least 2 times in only a week) - one of the COOLEST things that can be
done with this setup, if His Majesty could clean up the error messages
(please???) is you can run two independently addressed Icoms like this on a
SINGLE SERIAL PORT. How cool is that?
Mark, N5OT
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|