Hello,
Anyone else using a Kenwood TS-2000 with TR?
I have both a TS-2000 and a TS-440.
The band change sense/mode change sense and frequency display
all work on the TS-440 but do not work on my TS-2000.
everything else seems to work. TR will cause the TS-2000 to=20
change bands/modes, but will not sense them.
I suspect the problem is in the use of the AutoInformation command
"AI;" when sent to the rigs. On my TS-440 the correct parameter is
"AI0;" to turn it off and "AI1;" to turn it on. On the TS-2000 there
are now four modes according to the manual, however, only=20
two of the four modes actually work. =20
AI0; turns auto information off
AI1; is supposed to turn on OLD format
AI2; is supposed to turn on Extended behavior
AI3; is supposed to do both
In reality, I have noticed with a terminal program (HyperTerm) that
only AI0 and AI2 work. All other commands return the error
condition "?;"
If I initiate an AI2; command, I do indeed get auto information from
the TS-2000, but does TRLog know to do this? If TRLog is using
an AI1; then I suspect that is the source of my problem...
Can anyone confirm this behavior on their own TS-2000? Or perhaps
it is my TS-2000 only that behaves this way...
Like I said, My TS-440 works great with TR...
Thanks for considering this information...
George - Ku3o
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|