CC cluster is a little 'strange'. First, one of the things that does
not yet work in CC cluster is mail, so you have to email Ernie
direct. Second thing is in AR-User, the WWV spots do not show up on
historical information, you have to wait until the next WWV
announcement is made, and then the WWV window in the DX window will
work. Third is when you set filters to pass only the CW bands, CC
cluster will come back and tell you what bands are REJECTED! That
confused the heck out of me, but it works. (Once you set your
filters, as a test, log out of AR-User, then log back in and you
should see only spots originated by K, VE.)
You can add KS4Q-1 to VE7CC's AR-User by clicking on 'Configuration',
then Cluster (Telnet). A window will come up with 'Node', 'Add',
'Exit'. You type KS4Q-1 and then click on 'Add'. When you click on
'Add', the window changes and you now have space to put his address
and port. Once you do that, click on 'Apply' and you have addded
KS4Q-1 to the cluster data base.
KS4Q-1 Address: dx.ks4q.net:7373 You do not add anything to 'Port'.
Once you have done that, click on 'Configure', then Cluster (Telnet)
and type KS4Q-1 in the 'Node' window, then click 'Exit'. KS4Q-1
should appear in the 'Connect' window at the top of AR-User window.
Hope this helps.
Tom - W4BQF
At Thursday 08:36 PM 8/17/2006, you wrote:
>Gang,
>
>I've tried using the VE7CC spotting software but here are a couple
>questions:
>
>1. I have all the filters set for CW only,yet when I CONNECT to KS4Q
>node, it drops a hundred spots into the buffer and it includes the
>entire band, not just CW. I do have the spotters set to K,VE only and
>that is working fine - only spots posted by K,VE spotters appear. When
>I do a sh/filter included is this line:
>DX BandMode Filter set to Pass:
>160-CW,80-CW,40-CW,30-CW,20-CW,17-CW,15-CW,12-CW,10-CW,4-MTR
>so I'm pretty sure the filters are set to CW only. Since 80% of the
>spots are phone, that's a lot to wade thru!
>
>2. I tried to connect to KS4Q-1 as requested by Ernie but try as I may,
>I cannot get it to connect to the CC node, only get the AR node as I
>recall (KS4Q). KS4Q-1 is not in the list of available nodes in VE7CC
>and I can't seem to add it, even tho I tried dx.ks4q.net:7373 address.
>
>Any ideas?
>
>--
>Jim Stafford W4QO Roswell, GA USA
>
>
>_______________________________________________
>SECC mailing list
>SECC at contesting.com
>http://lists.contesting.com/mailman/listinfo/secc
|