SD-User
[Top] [All Lists]

Re: [SD-User] Rig control

To: "H. M. Motley Jr." <hmmjr@comcast.net>, sd-user@contesting.com
Subject: Re: [SD-User] Rig control
From: "Ian Greenshields" <ian.greenshields@gmail.com>
Date: Fri, 25 May 2007 17:28:14 +0100
List-post: <mailto:sd-user@contesting.com>
This is a known problem with SD on a number of rigs, including the Ten-Tec
Argo V, Jupiter, Omni VII.

Unfortunately there isn't a solution right now as there is no way in the rig
control file to define the set frequency command.

73 Ian G4FSU


On 24/05/07, H. M. Motley Jr. <hmmjr@comcast.net> wrote:
>
> I have my WinKeyer USB  and rig working with SD now except keying in the
> frequency in the call sign area does not change my rig.  I have a Ten Tec
> OMNI VII and used the Jupiter set up except I changed the parameters to BPS
> 57600, data bits 8, stop bits 1, parity N.  Linktime is 20 and polltime is
> 50.  Information is sent from the rig to SD just fine but does not seem to
> happen in the other direction. Any suggestions?
>
> Puck, W4PM
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user

<Prev in Thread] Current Thread [Next in Thread>