RTTY
[Top] [All Lists]

Re: [RTTY] N1MM Challenges

To: rtty@contesting.com
Subject: Re: [RTTY] N1MM Challenges
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Thu, 17 Nov 2016 17:15:30 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>

I have done my best to configure MMTTY to use with N1MM. However, I
have two questions.

As always, *please* read the configuration example for MK II and N1MM+
available in Router (Help | Download Documents) or online in the MK II
area at www.microHAM-USA.com/support.html.

There are multiple configurations for MMTTY and/or MMVARI - all of
which are documented in the example.  If you are hearing PSK31, it
is likely that you are using MMVARI instead of MMTTY and have not set
the N1MM "Mode Control" tab correctly for your transceiver (see the
N1MM+ on-line documentation for information on Mode Control -> Mode
sent to radio and the "Digital Modes" tabs).

> 2.       2.  Any assistance on how to configure RTS and DNR would be
> appreciated.

Set both to "ALWAYS OFF".  N1MM+ will provide digital mode PTT on the
FSK port (if MMTTY is configured correctly) and CW/SSB PTT using the
WinKey PTT line as documented in the N1MM+/MK II configuration example.

73,

   ... Joe, W4TV

On 11/17/2016 2:24 PM, Bob Garrett wrote:
Hi Listers,



Been a WL user for many years.  Now venturing in to N1MM.  So far, the
experience has been a good one although there is certainly a rather steep
learning curve.



I have done my best to configure MMTTY to use with N1MM.  However, I have
two questions.

1.        Where do I set the soundcard parameters?  Currently, when I press
any of the "F" keys for macros, I get diddles on the air and a psk31
transmission through my computer sound card.  I'm thinking I may have a
incorrect "mode" setting on the config but not sure.

2.       2.  Any assistance on how to configure RTS and DNR would be
appreciated.  I using a Microham MK II, FTDX5000 and MMTTY for my RTTY
program.  Not quite sure on PSK as of this writing.

Any help appreciated.  I'm a blind ham so please be very clear on any
instructions.  Works great on CW in the SO1R2V setting.  Very cool.  73, Bob
K



_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>