On 5/26/2016 10:35 AM, Rory n6oil@arrl.net [N1MMLoggerplus] wrote:
Then Joe does he just need uncheck the the 45.45 baud boxes in MMTTY
then?
As long as he does not recall a profile that "Fix 45.45 baud" checked.
The proper way to fix the problem is to recall each profile (one at a
time), uncheck the "Fix 45.45 Baud" box then save the modified profile
(Profiles(S) -> Assign Menu) to over write the original profile.
It is likely that one will want to create a couple of profiles (e.g.,
"Standard" and "Fluttered (FIR)") that specify 75 baud so it is not
necessary to change the "Baud" setting on the "Decode" tab (Option |
Setup MMTTY | Decode) every time the profiles are changed.
I would recommend two complete sets of profiles - one for 45.45 baud
and one for 75 baud - that could be saved and recalled using Profiles
-> Load from file and Profiles -> Save to file (in the MMTTY DI) based
on the contest "speed."
73,
... Joe, W4TV
On 5/26/2016 10:35 AM, Rory n6oil@arrl.net [N1MMLoggerplus] wrote:
Then Joe does he just need uncheck the the 45.45 baud boxes in MMTTY then?
Because that's all I had to do beside run the ESTFSK64 on my RigBlaster.
Rory
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|