Hello to the group,
i am using a DXP-38 as a additional decoder. The setup consist of a
756pro3 with Digikeyer2
and a K3 with a Digikeyer. The easies way to do this is a simple Y cable.
For the K3 you can use a simple stereo audio Y cable connected direct to
the radio.
For the pro3 i soldered an Y adapter to connect the DXP-38 to the audio
out from my rig.
The only reason i stopped using the dxp as a decoder is the software
from HAL.
Every few secounds i hear a "pling" from the pc speaker. This is really
annoying.
Does anyone know a software for the DXP-38 without this annoying sounds?
MixW is my main programm for RTTY (only FSK), but i use always more than
one decoder.
Most of the time i use MMTTY and/or Airlinkexpress (excellent decoder!)
as a additional RTTY decoder.
The built in decoder from my pro3 is also always on witch is one of the
best RTTY decoders i know.
vy 73 de Holger, OE9GHV
Am 01.02.2012 05:34, schrieb Dick Flanagan:
> I know some folks run multiple RTTY decoders, with one of them often
> being MMTTY and the other a DXP38. Is it possible to run these two
> decoders with one radio or is SO2R necessary?
>
> Dick
> --
> Dick Flanagan K7VC
> dick@k7vc.com
>
> On 1/31/2012 8:15 PM, Joe Subich, W4TV wrote:
>>
>>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|