> COM3, YAESUE FT-2000, 4800, POLL CHECKED, Comm PTT: YES
ALWAYS, ALWAYS, ALWAYS, set Comm PTT: NO.
Writelog does not time the RTTY data but simply dumps it
to the buffer. When Writelog has finished dumping data to
the buffer it drops PTT (sends a PTT OFF command via CAT).
It is the CAT PTT OFF that is causing the FT-2000 to stop
transmitting before the message is finished.
BTW, with WriteLog it is usually wise to add a couple
spaces to the end of every message to provide a bit of a
tail to prevent a "too quick" PTT drop.
> I could not find a PTT setting in MMTTY and I thought that
> Writelog or Router handled the PTT function.
MMTTY always asserts PTT on the FSK port (in previous versions
of MMTTY, the "FSK" port on the TX tab was even labeled PTT
Port). Router never handles PTT independently, it only passes
the status of DTR on the FSK or PTT ports.
73,
... Joe, W4TV
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of KC4HW
> Sent: Saturday, February 13, 2010 11:50 AM
> To: rtty@contesting.com
> Subject: Re: [RTTY] Radio stops sending messages
>
>
> I did check MMTTY, MISC, and USB PORT is selected for C: Limiting
> Speed.
>
> I am not sure that I understand about the PTT in MMTTY and not the
> Writelog PTT ont he CW port????
>
> My setup is:
>
> MK2R+, router 7.2.4
> FT-2000D, CAT on COM3 and FSK on COM5 (ptt checked) showing
> 45 5N1.5
>
> Writelog, v 10.69D, with SETUP, PORTS:
> COM3, YAESUE FT-2000, 4800, POLL CHECKED, Comm PTT: YES
> COM5, No Rig, AUTO, POLL CHECKED, Comm PTT: Yes
>
> MMTTY v 1.66G
> I could not find a PTT setting in MMTTY and I thought that
> Writelog or
> Router handled the PTT function.
>
> The problem: Is that the the radio is unkeying before the message is
> completed. It does not unkey at the same place in the message
> everytime and sometimes not at all. But it does it more
> times than not.
> Actually, MMTTY shows that the message is still transmitting, so does
> the MK2R+ with the CW/FSK and PTT LEDs, but the radio will unkey
> before the message is completed.
>
> Still need some help. Anyone got any suggestion.
>
> Thanks in advance
>
> Jim/KC4HW
>
>
>
> On 13 Feb 2010 at 0:48, Joe Subich, W4TV wrote:
>
> >
> > In MMTTY, open the MISC tab (in set-up) and click the "USB Port"
> > button. Select "C: Limiting Speed" ... also use the PTT from MMTTY
> > (DTR on the same port at FSK) and not the WriteLog PTT on
> the CW port.
> >
> >
> > 73,
> >
> > ... Joe, W4TV
> >
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: rtty-bounces@contesting.com
> > > [mailto:rtty-bounces@contesting.com] On Behalf Of KC4HW
> > > Sent: Friday, February 12, 2010 7:13 PM
> > > To: rtty@contesting.com
> > > Subject: [RTTY] Radio stops sending messages
> > >
> > >
> > > Well it appears that the message in Writelog are stopping before
> > > they are completely sent.
> > >
> > > Using Writelog and MMTTY...
> > >
> > > any suggestions..
> > >
> > >
> > > Jim/KC4HW
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|