On Jun 11, 2014, at 9:00 PM, Ed Muns wrote:
> OTOH, that part of the decoding algorithm is probably key to
> 2Tone's excellent copy of weak and other marginal signals.
The trade off between a "low-latency crummy decoder" and a "high-latency better
decoder" can be solved if you allow new GUI elements into your modem.
Run two demodulators. The low-latency one prints first. The high-latency
decoder then overprints over those characters when they become available from
the high latency decoder. This way, your eyes do not need to switch its focus
between two windows. Strong signals will print correctly right away.
Variations on this theme include using two different color fonts that produces
a third color when the two decoders agree, etc.
I had discussed this technique before with G3YYD for making even longer latency
decoders tolerable (for example, ones that corrects bit clocks by using
"future" bits for pseudo-synchronous clocking). But David is hobbled by the
existing modem user interfaces.
73
Chen, W7AY
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|