Oh, I forgot to add ... there will be those times when someone 'doesn't get the
memo' or doesn't print the UP 1-3 and will be calling on the transmit
frequency. My advice, and the advice that was given to me, was don't answer
them until they are in the calling passband. This worked very well.
73, Jamie
WB4YDL
Sent from my iPad
> On Apr 12, 2014, at 9:46 AM, "James C. Hall, MD" <heartdoc@nwtcc.com> wrote:
>
> Hi Dick:
>
> Yes, I caught myself doing this on the first day of TN operation, but I was
> quickly told 'don't do that' ! It was my first time being the fox and running
> split, completely opposite from when you are chasing DX. It was REALLY fun !
>
> I made over 1700 Q's on my RTTY shifts and really enjoyed myself. The pileups
> were something I've never experienced and running split is simply a must. The
> paradigm shift for me was using a panadapter (the Elecraft P3) so as to see
> the signals and not just hear them. That made all the difference in the world
> as I could rapidly QSY to a signal 3 kHz away when I saw him.
>
> I used my Elecraft K3 / P3 with my modified TL-922 amplifier. Worked great !
> I had lots of help from folks that have done this sort of thing before in
> expeditions and made my macros 'DX short', not 'Ed short', but close enough !
> BTW, I had both THE 'AA5's' in the log.
>
> I haven't been as active as you, Dick, on this Centennial QSO Party,
> preferring to give the contacts rather than chase them. I did put W1AW/# in
> the log on the 12/17M bands since, with all my contesting, I still didn't
> have USA confirmed on the non-contest bands ! HI
>
> 73, Jamie
> WB4YDL
>
> Sent from my iPad
>
>> On Apr 12, 2014, at 8:37 AM, Dick Kriss <aa5vu@att.net> wrote:
>>
>> As noted on my web page at http://www.qsl.net/aa5vu/dxcc-table.htm I am
>> active the ARRL 2014 Centennial QSO party and it has been fun. I have moved
>> up on the ARRL’s Leader Board from #360 to #188 out of 91,610 participants -
>> with 319 QSOs for 27 States in CW, RTTY and Phone.
>>
>> For the most part the W1AW/P operators have been great but I recently
>> noticed one technique that was really confusing. The operator was saying UP
>> 2 but was selectively working some stations simplex. This resulted in
>> pile-up on his calling frequency and it was hard to hear (or see) his
>> reports. Hopefully, future operators will stay with split or simplex - but
>> not both at the same time.
>>
>> I do appreciate the RTTY macros that give my call twice (at the beginning
>> and end of the W1AW/P exchange). This is really helpful in simplex to be
>> sure the report was for me. The first statement of my call sometimes gets
>> stepped on.
>>
>> Thanks to the W1AW/P operators. You have done a good job and I am sure you
>> enjoyed the experience.
>>
>> 73 Dick AA5VU
>> Using a TS-590S, fldigi and Aether on a 27-inch iMac
>>
>>
>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|