Hello Rick,
Can you explain how this works? What I mean is, I have the Icom Pro III which
displays the suppressed carrier frequency. You told me to turn this feature on
for the Icom. I did and it worked as advertised.
But sometimes I use my Kenwood TS-950SDX which displays the SPACE frequency on
the radio when in RTTY mode. So the radio is showing 170 Hz lower than the
actual mark frequency.
Right now, when I use the Icom I enable the Auto Update TRX but when I used the
Kenwood I leave it off.
So my question is: if I am using the Kenwood and turn Auto Update TRX on, will
Logger know about this difference in radio behavior?
In practical terms, logging or posting spots 170 Hz off isn't a huge deal, but
it isn't precisely accurate either.
Thanks for the great programming you do with this software!
73 de Bob - KØRC in MN
- - - - - - - - - ORIGINAL THREAD - - - - - - - - - -
Date: Thu, 27 Mar 2008 11:05:28 -0400
From: "Rick Ellison" <rellison@twcny.rr.com>
Subject: Re: [RTTY] Spot Frequency
To: <RTTY@contesting.com>
Message-ID: <000301c8901b$ff0ce110$fd26a330$@rr.com>
Content-Type: text/plain; charset="us-ascii"
Mel..
If you turn on Auto Update TRX Frequency in N1MM you will be posting your
Mark Frequency which is the preference..
73's Rick N2AMG
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Mel Roberts
Sent: Thursday, March 27, 2008 10:12 AM
To: RTTY@contesting.com
Subject: [RTTY] Spot Frequency
Question: Do you use the frequency reported by the radio or use an
offset provided by the RTTY software (N1MM and MTTY in my case) when
spotting on the cluster?
73 Mel W3MR
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|