No need for two soundcards, though you probably want one dedicated to radio
(no Windows sounds). The stereo line out from the K3 goes to the line in on
the soundcard. The left channel is the main receiver, and the right channel
is for the subreceiver. Two installations of MMTTY and two digital
interface windows let you listen to both frequencies. That's also what I
use for split-frequency pileups on RTTY.
Jim N7US
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Jims Laptop Mail
Sent: October 13, 2011 09:03
To: rtty@contesting.com
Subject: [RTTY] SO2V - K3 - dual receivers
Looking for suggestions for running SO2V with my K3 and N1MM. Do I need
another sound card? I need to print both receivers. At present, I just print
the main rcvr, then tune on the second rcvr then switch using the A/B. Not
efficient.
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|