Joe, I was thinking the same thing with my MK2 and Yaesu FT5000. Does it
pull RTTY RX audio off of the RTTY cable or does it pull it from the AF out
jack? When trying to configure MMTTY for a single channel (in this case,
left), I have no RX audio. However right works fine, and of course Mono
does as well. My attempt was to have 2 copies of MMTTY or one of MMTTY and
one of 2Tone, each configured for left or right, and have the 5000's main
and sub RX's on at the same time. One copy of MMTTY on VFOA and the other
on VFOB.
I just don't seem to get any audio out of the 5000 in RTTY mode from the
left channel.
Charlie
N5WE
> Date: Thu, 12 Feb 2015 15:10:14 -0500
> From: "Joe Subich, W4TV" <lists@subich.com>
> To: rtty@contesting.com
> Subject: Re: [RTTY] Dual RX Single Radio
> Message-ID: <54DD08A6.90304@subich.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
> Yes, both WriteLog and N1MMM Logger support dual receiver operation
> with the K3. See the documentation for those programs.
>
> One note however, the Signalink *will not work with dual receiver*
> operation because it is a single channel sound card. You need a stereo
> sound card (or two sound cards) for dual channel (two RX) operation.
>
> 73,
>
> ... Joe, W4TV
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|