Joe and Rich,
Thanks for your comments.
I use a WMR cable form the RB to the ACC-1 connector on the Icom. This is
the same cable I used with the old PC and true serial cables for years.
I never used the Mic connector.
My gut tells me that the RB should activate PTT thru ACC-1, but RB Technical
Support says it's only used for received audio. They say I must use Mic or
CI-V. I'm using the RB in the same way as before: Rig Control on connector
B and FSK on connector A. Therefore I have not changed any internal RB
jumpers. I'm really confused.
Phil
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Joe Subich,
W4TV
Sent: Sunday, June 05, 2016 3:23 PM
To: rtty@contesting.com
Subject: Re: [RTTY] Rigblaster Pro RTTY Question
> RB is connected to IC-7700 Aux port and CI-V.
What signals are connected from the RigBlaster Pro to the IC-7700 ACC jack?
Do you have *both* FSK (pin 1) and PTT (pin 3) connected to the ACC jack
(ground/common pin pin 2)?
> Does anyone know the path of the PTT signal from the RB to the 7700?
Unless you connect PTT output from your interface to the HSEND line on
ACC[1] or the PTT line on the mic jack, your interface can not assert PTT on
the IC-7700 (an Icom transceiver).
73,
... Joe, W4TV
On 6/5/2016 1:01 PM, Phil wrote:
> I am using N1MM to connect to a Rigblaster Pro via two WMR USB/serial
> cables,
>
> When trying to send an FSK RTTY message the following occurs:
>
> Hear a relay "click" from the RB.
>
> RB Green CS LED comes on.
>
> RB Red PTT comes on.
>
> RB Red FSK comes on and blinks to follow RTTY data.
>
> RIG IS NOT PUT IN TRANSMIT MODE.
>
> If I manually activate rig, RTTY signal is transmitted.
>
>
>
> RB is connected to IC-7700 Aux port and CI-V.
>
> No Mic connection.
>
> Does anyone know the path of the PTT signal from the RB to the 7700?
>
>
>
> As info, Rig Control works fine on RB connector B and all worked fine
> before change from true serial cables to USB/serial cables. Also
> changed PC and software from Writelog to N1MM.
>
> Thanks.
>
> Phil
>
> WA2LXE
>
> wa2lxe@optonline.net <mailto:wa2lxe@optonline.net>
>
>
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|