Hi all,
Strong RF from a low dipole is triggering the door latch solenoid on a
Whirlpool 465 gas oven. I installed an ac line filter but that didn't change
anything. I have a training manual that shows the wiring for the solenoid and
the next step will likely be adding ferrite corres to the controller followed
by adding an on-off switch to the solenoid since it's only activated during the
self-cleaning cycle. However, if anybody has cured a similar problem, I would
be interested in hearing how you did it.
73, Ward N0AX
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|