Hi,
I should have asked a different question... Any idea why the rig is
getting warmer than if no ferrite's...
Here is some more information...
A fellow wrote me off list asking for more info...
Antenna is on roof, and AC wiring is I am sure in attack area. About
three feet of coax between the tuner and radio. He is running 30 watts,
no grounds, all bonds are via coax, one ground to tuner. No balun on
the OCF...
I get that the OCF makes things very unbalanced, (he has no balun on
it), and I get that a single ferrite won't correct this, (he did no
winding), but why might the rig get warm? I thought I had a handle on
how this stuff was working, but for the life of me, I can't imagine why
the rig gets warm... It always sees a 1:1 because he is tuning it the
feedline to 1:1 as it feeds the rig...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Fri, 2014-06-20 at 09:18 -0700, Jim Brown wrote:
> On 6/20/2014 4:53 AM, David Cole wrote:
> > What is happening here, any ideas?
>
> First, because it's off-center fed, it's wildly unbalanced, so there's a
> lot of common mode current on the feedline, which makes it part of the
> antenna. The path for that current is through the tuner to ground.
>
> Second, I'm guessing that he didn't wind turns through the ferrite
> cores, simply clamped them on. That adds inductance to the common mode
> circuit, which changes the tuning.
>
> Study k9yc.com/RFI-Ham.pdf
>
> 73, Jim K9YC
>
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|