> > You shouldn't have to run at 2% for VOX. The next steps
> are 1% or 3%,
> > which is pretty coarse resolution!.
I wonder if you also find your mic gain control set at a very low level.
There IS an analog mic gain control, accessible through a small hole in the
bottom of the case .. I believe under the antenna/VFO controls on the left.
You could always reduce that somewhat.
With a Studio-1, my VOX setting is around "8" and there aren't any issues
with resolution "courseness".
> The one that really bugs me is trying to set the AGC threshold to
> minimum value, 0.37 uv. (The setting now recommended.) You have to
> turn and turn and turn that encoder!
I suspect if the encoder rate were increased, there'd be others grumbling
that it was too sensitive :-)
Grant/NQ5T
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|