Hi:
I'm new to Karlnet and to that list. I've searched the archives but
could not find a similar situation. Maybe someone could help me out...
I have two problems...
First problem:
I've set a few TurboCell ISP bridges and some RG1100 as CPE's.
They're working fine, but if put an access list (in 'TurboCell Acess list
setup') no one client is allowed in.
One table look like this:
00-60-1D-03-15-32,permit,max
00-02-2D-15-7C-FF,permit,max
00-02-2D-15-7D-35,permit,max
00-02-2D-4D-35-BE,permit,256
The first MAC is one sattelite (another bridge)
The second one is the main bridge (where that particular bridge is conected -
his upstream)
The third entry is another sattelite (another bridge)
The fourth entry is one RG1100 running turbocell.
Everything goes fine WITHOUT the table. Why the access list do not work in
my case ? The MACs are correct...
With the TABLE in place, the only conection that works is to the upstream
(00-02-2D-15-7C-FF) .
Second problem:
NAT in the AP1000 (TurboCell ISP Bridge).
I have the following routes in a particular bridge:
200.244.69.100/224 Direct 2
200.244.69.193/224 Direct 3
10.0.0.1/224 Direct 1
Default Router: 200.244.69.97
Prefered: 200.244.69.100
Bridging is disabled
Outgoing NAT is enable, and look like this:
Public IP/MASK
200.244.69.100 / 255.255.255.255
Private IP/MASK
10.0.0.1/255.255.255.224
Any computer conected to the 10.0.0.0/27 subnet could reach
ONLY the ip's directly conected to the ISP TurboCell Bridge (and the 10.0.0.0
subnet, of course). They go nowhere further. The access in that particular
bridge is working fine (I'm using DHCP in interface 3 and the PC Card clients
and RG's access the Internet just fine).
In the NAT clients the gw is 10.0.0.1 and the ip's in the range 10.0.0.2 -
10.0.0.30 . The DNS server is also correctly set, but it doesn't really matter
because all the tests we are doing are using ip addresses, not hostnames.
What is wrong with my NAT setup ?
Thanks !
Helio.
-
CompuLand ISP Admin
GnuPG Public Key: http://www.compuland.com.br/helio/gpgpublic.txt
|