Have you looked through previous list messages because I've posted alot of
details about Prism 2 cards in the last month or so.
Some possible causes:
- 802.11b Access Point Mode does not work with Prism 2 cards.
- the other wireless interface is 802.11b Access Point Mode and has a
Agere/Orinoco/Avaya card with firmware version 8.10 or lower.
*********** REPLY SEPARATOR ***********
On 2003-May-02 at 3:13 PM Bob Hrbek wrote:
>I just ordered a few of the 200mW cards from netgate.com
>
>I stuck one in a 4.31 Karlnet AP-1000 and it won't boot with the card
>inserted. Any ideas?
>
>I thought any Prisim 2 card worked.
>
>hmm
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
|