The way I have it is:
AP, ROR, COR all use the same /24 Then just add another block via direct and
point the gateway to the AP.
My 2 ¢
----- Original Message -----
From: "Hector Menjivar" <hmenjivar@aeromillas.com>
To: <karlnet@WISPNotes.com>
Sent: Sunday, August 03, 2003 1:27 PM
Subject: RV: [Karlnet] A very idiot question about routing explanation
>
> Hi:
>
> Maybe a cant explain my problem..thanks for your time, the situation is
> as follow:
>
> I get a wireless network working between two buildings using AP1000.
>
> Building A the network is 192.168.101.X, there is a COR whit address
> 192.168.101.169 mask 255.255.255.0
> Building B the network is 192.168.101.X, there is a ROR whit address
> 192.168.101.170 mask 255.255.255.0
>
> Now we need to move the network on building A to 192.168.102.X, and
> maintain the building B in the same 192.168.101.X network, and I don't
> know how to set up the AP100 whit the configurator to establish traffic
> between the two buildings, I mean I don't know how to route traffic thru
> this two networks.
>
> Again Thanks for your time, please help me.
>
> Hector
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
|