That's the odd thing, Bill. It's the same pigtail. So, I'm left wondering
about the antenna setup on the PtMP. I'll do some more signal testing with
the Orinoco card and see if that is working as before. I believe I may
have had a bit more antenna downtilt than needed on the PtMP, so cranked it
back from 8* to around 5.7*, but none of that should have caused the
problems I was seeing with the PRISM II. I'll have some customers (in beta
mode) loaded on this segment this week, so then I can see in real time how
the signal is effected as I change variables.
Norm
----- Original Message -----
From: "Bill Fisher" <fisher@akorn.net>
To: <karlnet@WISPNotes.com>
Sent: Monday, May 13, 2002 6:29 AM
Subject: RE: [Karlnet] PRISM II 100mW card kicks a.. (Nothing wrong with the
radio!)
>
> > AP1000 is located in...the only thing that changed here was the
> > card and the
> > pigtail (same length)) Receive signal strength was just as good as the
> > Orinoco card I swapped out, which was a bit of a surprise again, as the
> > Orinoco is specd as having better recv. sensitivity than the PRISM II.
>
> Last night I was thinking about your situation and wondering if it wasn't
> the pig-tail that could be bad. I wonder if you used the same one in the
> PTP link that you did in the PTMP?
>
> Bill
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
|