Be careful with your AP1000. There are two + pins and two - pins....I'll
look them up for you. If you send it to many volts (and it isn't very
tolerant) ....bu bye radio.
-bob
----- Original Message -----
From: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Wednesday, May 21, 2003 1:30 PM
Subject: Re: [Karlnet] RG1000 voltage regulator?
> Hi there
>
> are you ppl doing this PoE (power over ethernet) or simply powering
> the RG1000 units with a higher Voltage?
>
> another related questions:
>
> - I got my hands on one AP1000 without the power suply. Can any
> of you tell me if it's power connector is center positive or center
> negative?
>
> - also, does it permit a higher voltage power suply as you're telling
> RG1000 do?
>
> Thanks in advance for this advice
> Cheers
> !3runo
> from Brazil
>
> > I dont know what regulator the RG has on it but I use 15vdc power to
them
> > all the time on long cable runs. And I also run the RGs with batteries
as
> > well and the chargers that I use put out about 14vdc and they have been
> > running for well over a year now.
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|