Martin, you are correct in your assumtion.The learning table (bridge) module
is before MAC Auth (Filtering), the only was to guarantee the proper MAC
bridging is to incorporate a hardware device on ethernet.With this hardware
device in place you could limit MAC Addr. You could also purchase a
unlimited key and deny non listed MACs from bridging in ACL for ethernet(
MAC-Advance Auth).
Thanks
RLM
----- Original Message -----
From: <martin@belairinternet.com>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Tuesday, September 14, 2004 10:06 PM
Subject: [Karlnet] Bridge learn Issue
> Hey Everyone,
>
> I have a little problem that someone here might have a solution to ;)
>
> I have a PtP TC bridge with 7 clients on the remote site, only 5 of these
> need access over the link, but my problem is that the bridge learns the
> mac addresses of the units that does not need access, on a random basis, i
> might get the right macs in the bridge learning table, but after a while
> they change and i loose connectivity to the once that do need access.
>
> Since im using a 5 user license that is a problem.
>
> I need to be able to control the entrys into the learning table.. Ive
> tried mac filtering under bridging, but it seems the learning table comes
> before mac filtering and therefore learns the wrong MAC addresses.
>
>
> Any help i appriciated.
>
>
> Martin Madsen
> Bel AIr Internet
>
> PS. The turbocell access list will not fix the problem since it only works
> for TC clients.
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|