Well this may not be exactly the correct place to ask this, but I am
trying to set an Yaesu 857D up for radio control with the N1MM Contest
program.
I have a cable which terminates in a three pin plug on one end and is
wired for the data jack on the other. It is used with either the West
Mountain RIGTALK or you can plug it into the Plug and Play. I do have
the Plug and Play but it seem that N1MM will not address the data of the
Plug and Play because it also has to address the CW and Digital through
the same comport.
I am trying to set it up though the USB port renumbered to COM 5 with
the USB RIGTALk and can get it working somewhat, but when I change bands
it will end up getting the wrong band data and show on a completely
different frequency than the radio is on. So it looks like the two are
not taking to each other correctly.
Anyone set one up, if so how did you do and and also what Parameters did
you use for the port configuration, IE Speed, Parity, Databits, Stop
BIts, DTR, RTS, ECT.
Please reply off list. Any help appreciate.
Thanks
Al N1API
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|