Hi
Make sure that the baud rate in the TS570, the COMTSR AND the CT-SETUP of
the radio are all the same rate.
Mike-
At 07:13 AM 21/11/97 -0800, Alexander Usachev wrote:
>Hi !
>My call is RA3AF.
>My tranceiver is kenwood TS570.
>I'v got CT9-27 programm, but I have a problem to connect CT with TS570.
>TS570 is connected with computer directly without any additional
>devices and all the commands chould be the same as for TS850, as I
>understood from Kenwood manual. So I choose TS850 in CT menu because
>there is no TS570. But there is no any reaction in my tranceiver when
>I sehd commands from CT ! May be some settings in CT or in TS570 are
>wrong.
>I will appreciate if somebody tell me about operation CT programm with
>TS570. What settings should be made or what programms shold be run
>before ?
>73!
>RA3AF Al. Usachev 117279 Profsoyuznaya 99, 170, Moscow, Russia.
>e-mail: ra3af@yahoo.com
>
>__________________________________________________________________
>Sent by Yahoo! Mail. Get your free e-mail at http://mail.yahoo.com
>
>--
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>WWW: http://www.contesting.com/ct/
>Questions: owner-ct-user@contesting.com
>
>
----------------------------------------------------------------
Michael K. Walker Legato Systems (Canada) Inc.
Escalation Management 3390 South Service Road
(905) 637-4738 Burlington, ON
http://www.legato.com L7N 3J5
pager: 1480111@pagemart.net
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|