I just tested the current 9.46 and had no problem. I previously had an RFI
problem with any version of CT which was solved by putting the metal case
back on the PC.
So, see if the problem goes away with reduced power or different beam
heading or with ferrite cores on the leads to the laptop.
Did you go back to 9.27 and see if the problem went away?
If all else fails and 9.27 works, use 9.27.......
GL and KB!!! Stay in the seat and OPERATE!
John, K1AE
> -----Original Message-----
> From: owner-ct-user@contesting.com
> [mailto:owner-ct-user@contesting.com]On Behalf Of Alfred J. Frugoli
> (KE1FO)
> Sent: Friday, November 26, 1999 3:45 PM
> To: ct-user@contesting.com
> Subject: [ct-user] CW Keying in 9.46
>
>
>
> Hello fellow CT users,
>
> I was going to update my version of CT from 9.27 to 9.46 for the contest
> this weekend. I just swapped the ct.exe files and with v9.46 as soon as I
> press an f-key for cw keying, it just keys down a continuous tone, not
> sending any CW. v9.27 works fine. I'm running on a 386 laptop. Any
> suggestions?
>
> Thanks,
>
> Al, KE1FO
>
>
> --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.k1ea.com/
> Questions: owner-ct-user@contesting.com
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|