OK, looks like everyone's putting in their 2 cents worth on it.
There was only one call I wanted, and I wanted it bad: K1RK
My name is Kirk, and I have to repeat it often. I figured that it
might be a bit easier after time with that callsign.
A club station got it several weeks ago. I sure hope it was really a club.
I'm keeping WR3O, despite planning to stay here in Tennessee. Competition
will be tough for "4" calls. I've been a "3" since age 14 (ex WB3FAX.)
Besides, I kinda like it. I occasionally get called "WRthirty" on phone,
but never on CW!! :-)
I think I'll put the thirty bux into a shiny new call sign badge. :-)
Good luck on your new calls.
-Kirk WR3O <probably for the forseeable future...>
>From barry@w2up.wells.com (Barry Kutner) Sun Sep 1 12:44:16 1996
From: barry@w2up.wells.com (Barry Kutner) (Barry Kutner)
Subject: WAE E-mail Submissions?
Message-ID: <H1okTD1w165w@w2up.wells.com>
k5zd@ultranet.com (Randy Thompson) writes:
> Time for another dumb question...
>
> Anyone know of an address for e-mail submission of WAE logs? I did have one
Randy - It goes to 100712.2226@compuserve.com
73 Barry
--
Barry N. Kutner, W2UP Internet: barry@w2up.wells.com
Newtown, PA Packet Radio: W2UP @ WB3JOE.#EPA.PA.USA.NA
Packet Cluster: W2UP >WB2R (FRC)
.......................................................................
>From mats.persson@mbox2.swipnet.se (SM7PKK) Sun Sep 1 14:05:03 1996
From: mats.persson@mbox2.swipnet.se (SM7PKK) (SM7PKK)
Subject: IC735 how to change 1200 baud to higher? for remote control.
Message-ID: <2.2.32.19960901130503.006ae428@mailbox.swip.net>
Hi,
Does anyone out there know the status of J22 which control the speed and=
adress
of the IC735 for computer interface. I would like to speed up the dataflow
to see how=20
it react with my loggingprogram.
73 de Mats SM7PKK
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
SM7PKK E-mail: mats.persson@mbox2.swipnet.se
Mats Persson
Zenithgatan 24 # 5 DON=B4T USE CALLBOOK ADRESS IT=B4S WRONG!
S-212 14 Malmoe
Sweden CW !!
P.S My logs are open forever.. ever.. ever..
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>From robrk@fyi.net (Robert Morris) Sun Sep 1 18:20:30 1996
From: robrk@fyi.net (Robert Morris) (Robert Morris)
Subject: Surplus Military Mast
References: <199609010441.AAA02580@orion.neca.com>
Message-ID: <3229C5DE.357@fyi.net>
Tom Francis wrote:
>
> Greetings and felicitations
>
> Someone mentioned to me that some
> surplus military radio mast (portable)
> is available - does anyone know the
> source of the mast or where I can obtain
> some?
>
> Thanks...
>
> 73
>
> Tom, NM1Q (tomf@neca.com)Fair Radio in Ohio... No magazines close to 'puter,
> but sure
their ad is in QST etc.... K2RK
>From n2uck@juno.com (Roman S Makuch) Sun Sep 1 20:31:21 1996
From: n2uck@juno.com (Roman S Makuch) (Roman S Makuch)
Subject: Summary: Tower Help
References: <9609010154.AD15745@alaska.net>
Message-ID: <19960901.114512.5311.1.n2uck@juno.com>
On Sat, 31 Aug 1996 17:54:30 -0800 kl7y@alaska.net (Dan Robbins) writes:
>At 05:13 PM 8/31/96 -0400, you wrote:
>>What is you-all's luck with cold galvinizing spray paint??? de K4VUD
>>
>
>No problems here. I take a file to the area to be repaired to make
>sure it
>is clean - rust can sometimes sneak under the edges of the existing
>galvanizing near a nick. Also, make sure it is a warm day, "COLD"
>does not
>apply to the ambient temperature.
>
> Dan KL7Y
>
>
And how many stress risers do you create with the file?? Not to mention
spreading tiny rust particles onto the steel, which helps rust start
faster?
73 de Roman S. Makuch, N2UCK
>From hflasher@dayton.net (Harry Flasher) Sun Sep 1 23:33:49 1996
From: hflasher@dayton.net (Harry Flasher) (Harry Flasher)
Subject: Caribbean Contestor Needed
Message-ID: <322A0F4D.6F79@dayton.net>
The J3A contest group from Grenada could use another one or two ops
for the CQ WW SSB contest in late October. We have a very good site
to operate from - there is a 2 ele 40 meter beam up - the rest of the
antennae will need to be erected by the group.
Lots of space in well lit building for staion set up.
For any seriously interested, please call me 513-434-9616 or 434-1616 if
first line is busy.
Harry W8KKF J37K J3A(contest call)
>From jesposit@sctcorp.com (Joe Esposito) Sun Sep 1 19:30:00 1996
From: jesposit@sctcorp.com (Joe Esposito) (Joe Esposito)
Subject: Low Pass Filter for 6 meters
Message-ID: <m0uxHIK-0003aBC@sctladm.sctcorp.com>
As I put the finishing touches on my contest station, I've decided
that a low pass filter would be a good addition. There are lots of
good HF low pass filters on the market. I want one that'll pass 6
meters too. The XYL is a no-code tech and will be operating my rig on
6 with a 7 ele. Force 12 yagi. I'm sure that'll attract some attention
that I'd like to minimize if possible. Any suggestions for a source?
Please reply directly to me. Thanks.
73,
Joe, K2YJL
|