I think Holger means crosstalk, rather than distortion. The critical issue will
be whether the feedline crosstalk is greater than that from the antennas. There
may be ways to estimate the feedline crosstalk, but I don’t know without doing
some research. However, it might be worthwhile spacing the wires for less than
600 Ohms as that will reduce crosstalk for a given distance between feedlines.
The tradeoff will be slightly more loss due to more spacers.
73,
Scott K9MA
----------
Scott Ellington
--- via iPad
> On Mar 16, 2019, at 11:48 AM, Jim Brown <k9yc@audiosystemsgroup.com> wrote:
>
>> On 3/15/2019 7:08 PM, Holger Hannemann wrote:
>> Does anyone has experience with potential distortion when operating parallel
>> running open feeder lines?
>
> Distortion requires a non-linear element in the signal path. Transmission
> lines are inherently linear. There IS the possibility of distortion in a
> ferrite core device used to transform impedance at either end of the line.
> Air core transformers would not have this problem.
>
> I think you're right to be concerned about crosstalk between multiple lines
> running parallel to each other for these long distances, which will be in
> addition to the crosstalk between antennas. In any event, you will need
> serious filtering for amplifier harmonics just as with any other
> multi-transmitter station.
>
> 73, Jim K9YC
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|